The Bi-channel pulser-receiver—CTS-8072PR is a tailored instrument for the high-frequency inspection. It is fitted with the low-noise and broadband receiving amplifying circuit. Moreover it is equipped with the high-performance sharp pulser and the sharp wave transmitting circuit composed of the high voltage power supply. The CTS-8072PR+ serves the function of dual-channel acquisition, achieving the synchronous control of computer and instrument. This instrument can be applied to assess the acoustic properties and test the performances of high-frequency ultrasonic probes. It can also be applied in such occasions as the high-frequency ultrasonic flaw detecting system (such as ultrasonic scanning microscope, high-frequency C-scan), thickness gauging, material characteristics measuring and so on.
The Bi-channel pulser-receiver—CTS-8072PR is a tailored instrument for the high-frequency inspection. It is fitted with the low-noise and broadband receiving amplifying circuit. Moreover it is equipped with the high-performance sharp pulser and the sharp wave transmitting circuit composed of the high voltage power supply. The CTS-8072PR+ serves the function of dual-channel acquisition, achieving the synchronous control of computer and instrument. This instrument can be applied to assess the acoustic properties and test the performances of high-frequency ultrasonic probes. It can also be applied in such occasions as the high-frequency ultrasonic flaw detecting system (such as ultrasonic scanning microscope, high-frequency C-scan), thickness gauging, material characteristics measuring and so on.
Negative sharp wave pulser and receiving amplifier
Pulse width: 7ns; pulse voltage: -150V~-300V
Optional PRF with the highest value up to 20kMHz
110MHz (-3dB) Broadband pulse receiver
60dB RF Gains with 1 dB increment.
20kHz or 20MHz optional high-pass filter.
RF signal output, Sync signal output, External Triggering Input, USB and network ports
Sampling Rate: 500MHz, 12bit
PC synchronized control and display, supporting custom-made software development package
Provides 30MHz, 50MHz and other high-frequency probes developed by our company.
| Pulse | Negative sharp wave |
| Pulse Fall Time & Rise Time | Typical value ＜3ns; Maximum ≤3.5ns |
| Pulse Amplitude | -150V~-300V |
| Damping | 25Ω、33Ω、50Ω、100Ω |
| Pulse Width | 7ns (50Ω damping) |
| Test Modes | Single/Dual |
PRF | 29 optional levels |
| Sync Pulse Output | TTL (50Ω Output impedance) |
| External Triggering Input | TTL (pulse>50ns) |
| MAX Bandwidth | 20kHz~110MHz |
| Gain Adjustable Range | -6dB~54dB |
High-pass Filter | 20kHz or 20MHz |
| Low-pass Filter | 110MHz |
| Max Signal Output | ±1.5Vp-p |
Input impedance | 50Ω |
| Output impedance | 50Ω |
| I/O port | T,R,RF output/Sync output/External Triggering Input |
Power Supply | Optional AC 220V or AC 110V, 50Hz~60Hz, default configuration is AC 220V |
| Dimensions | 305mmx230mmx105mm |
| Temperature | 0～50 ℃ |
| Weight | 5.0kg |
The acoustic property assessment and performance index test for high-frequency ultrasonic probes.
- High-frequency ultrasonic flaw automatic detecting system, thickness gauging and material characteristics measurement.
